diff --git a/netmiko_Api/public/dailyLogs/20230920-AUTO-Session.AU-dev.log b/netmiko_Api/public/dailyLogs/20230920-AUTO-Session.AU-dev.log
index d33fa1c..2d76b19 100644
--- a/netmiko_Api/public/dailyLogs/20230920-AUTO-Session.AU-dev.log
+++ b/netmiko_Api/public/dailyLogs/20230920-AUTO-Session.AU-dev.log
@@ -536,3 +536,1076 @@ ciscoasa(config-if)# end
ciscoasa#
Finish
+
+
+
+=============================================================DPELP=============================================================
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+RAM: 0.46G (Default 0.40G)
+Flash: 0.24G (Default N/A)
+=================================================================
+
+Router####show inv
+NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL174510ZN, Hw Revision: 1.0"
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+
+NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
+PID: PWR-2911-POE , VID: V02 , SN: ART1904F3KX
+
+###show ver
+Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
+
+Technical Support: http://www.cisco.com/techsupport
+Copyright (c) 1986-2013 by Cisco Systems, Inc.
+Compiled Thu 20-Jun-13 13:06 by prod_rel_team
+
+ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
+
+Router uptime is 1 week, 2 days, 0 minutes
+System returned to ROM by power-on
+
+System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M4.bin"
+Last reload type: Normal Reload
+Last reload reason: power-on
+
+
+
+This product contains cryptographic features and is subject to United
+States and local country laws governing import, export, transfer and
+use. Delivery of Cisco cryptographic products does not imply
+third-party authority to import, export, distribute or use encryption.
+Importers, exporters, distributors and users are responsible for
+compliance with U.S. and local country laws. By using this product you
+agree to comply with applicable laws and regulations. If you are unable
+to comply with U.S. and local laws, return this product immediately.
+
+A summary of U.S. laws governing Cisco cryptographic products may be found at:
+http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
+
+If you require further assistance please contact us by sending email to
+export@cisco.com.
+
+Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory.
+
+Processor board ID FGL174510ZN
+3 Gigabit Ethernet interfaces
+1 terminal line
+1 Virtual Private Network (VPN) Module
+DRAM configuration is 64 bits wide with parity enabled.
+255K bytes of non-volatile configuration memory.
+250880K bytes of ATA System CompactFlash 0 (Read/Write)
+
+
+License Info:
+
+License UDI:
+
+-------------------------------------------------
+Device# PID SN
+-------------------------------------------------
+*0 CISCO2911/K9 FGL174510ZN
+
+
+
+Technology Package License Information for Module:'c2900'
+
+-----------------------------------------------------------------
+Technology Technology-package Technology-package
+ Current Type Next reboot
+------------------------------------------------------------------
+ipbase ipbasek9 Permanent ipbasek9
+security securityk9 Permanent securityk9
+uc uck9 Permanent uck9
+data None None None
+
+Configuration register is 0x2142
+###show diag
+Slot 0:
+ C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 3 ports
+ Port adapter is analyzed
+ Port adapter insertion time 1w1d ago
+ EEPROM contents at hardware discovery:
+ PCB Serial Number : FOC17428K3K
+ Hardware Revision : 1.0
+ Part Number : 73-11833-11
+ Top Assy. Part Number : 800-30797-06
+ Board Revision : C1
+ Deviation Number : 130603
+ Fab Version : 03
+ Product (FRU) Number : CISCO2911/K9
+ Version Identifier : V07
+ CLEI Code : CMMJD00ARA
+ Processor type : C1
+ Chassis Serial Number : FGL174510ZN
+ Chassis MAC Address : 78da.6e42.4a48
+ MAC Address block size : 80
+ Manufacturing Test Data : 00 00 00 00 00 00 00 00
+ EEPROM format version 4
+
+ EEPROM contents (hex):
+ 0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 38 4B 33 4B 40
+ 0x10: 06 18 41 01 00 82 49 2E 39 0B C0 46 03 20 00 78
+ 0x20: 4D 06 42 43 31 88 00 01 FE 2B 02 03 CB 8C 43 49
+ 0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 37 20 D9
+ 0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 44 30 30 41 52
+ 0x50: 41 09 C1 C2 8B 46 47 4C 31 37 34 35 31 30 5A 4E
+ 0x60: C3 06 78 DA 6E 42 4A 48 43 00 50 C4 08 00 00 00
+ 0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
+ 0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ Internal Power Supply information
+ Top Assy. Part Number : 341-0236-04
+ Deviation Number : 0
+ PCB Serial Number : ART1904F3KX
+ RMA Test History : 00
+ RMA Number : 0-0-0-0
+ RMA History : 00
+ Version Identifier : V02
+ Product (FRU) Number : PWR-2911-POE
+ CLEI Code : COUPAFRBAB
+ Board Revision : A0
+ EEPROM format version 4
+ EEPROM contents (hex):
+ 0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 04 88 00 00 00
+ 0x10: 00 C1 8B 41 52 54 31 39 30 34 46 33 4B 58 03 00
+ 0x20: 81 00 00 00 00 04 00 89 56 30 32 20 CB 8C 50 57
+ 0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 43 4F 55 50
+ 0x40: 41 46 52 42 41 42 F3 00 59 41 01 86 42 00 05 F8
+ 0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
+ 0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
+ 0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
+ 0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
+ 0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
+ 0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+
+
+Embedded Service Engine 0/0 :
+ Total platform memory : 524288K bytes
+ Total 2nd core memory : 0K bytes
+ Start of physical address for 2nd core : 0x80000000
+ Virtual address start of 2nd core memory : 0x0 - 0x0
+ 2nd core configured disabled
+ L2 cache ways for 2nd core : 0
+###show post
+ ^
+% Invalid input detected at '^' marker.
+###show env all
+SYSTEM POWER SUPPLY STATUS
+==========================
+ Internal Power Supply Type: AC-POE
+ Internal Power Supply 12V Output Status: Normal
+ Internal Power Supply POE -48V Voltage Status: Normal
+
+ External Redundant Power Supply is absent or powered off
+
+SYSTEM FAN STATUS
+=================
+ Fan Rotation Alert: Total 2 Fan Low RPM
+ Fan 1 OK, Maximum speed setting
+ Fan 2 OK, Maximum speed setting
+ Fan 3 OK, Maximum speed setting
+ Fan 4 Low RPM
+
+SYSTEM TEMPERATURE STATUS
+=========================
+ Intake Left(Bezel) temperature: 29 Celsius, Normal
+ Intake Left temperature: 30 Celsius, Normal
+ Exhaust Right(Bezel) temperature: 33 Celsius, Normal
+ Exhaust Right temperature: 31 Celsius, Normal
+ CPU temperature: 52 Celsius, Normal
+ Power Supply Unit temperature: 31 Celsius, Normal
+
+REAL TIME CLOCK BATTERY STATUS
+==============================
+ Battery OK (checked at power up)
+
+SYSTEM POWER
+===============
+ Motherboard Components Power consumption = 82.2 W
+ Total System Power consumption is: 82.2 W
+
+ Environmental information last updated 00:00:20 ago
+###show logging
+Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
+
+No Active Message Discriminator.
+
+
+
+No Inactive Message Discriminator.
+
+
+ Console logging: level debugging, 1903 messages logged, xml disabled,
+ filtering disabled
+ Monitor logging: level debugging, 0 messages logged, xml disabled,
+ filtering disabled
+ Buffer logging: level debugging, 1903 messages logged, xml disabled,
+ filtering disabled
+ Exception Logging: size (4096 bytes)
+ Count and timestamp logging messages: disabled
+ Persistent logging: disabled
+
+No active filter modules.
+
+ Trap logging: level informational, 1906 message lines logged
+ Logging Source-Interface: VRF Name:
+
+Log Buffer (8192 bytes):
+2:04.707: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:07:35.351: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:13:05.939: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:18:36.583: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:24:07.171: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:29:37.815: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:35:08.403: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:40:39.047: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:46:09.635: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:51:40.279: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:57:10.867: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:02:41.511: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:08:12.099: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:13:42.743: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:19:13.331: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:24:43.975: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:30:14.563: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:35:45.207: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:41:15.795: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:46:46.439: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:52:17.027: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:57:47.670: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:03:18.258: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:08:48.902: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:14:19.490: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:19:50.134: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:25:20.722: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:30:51.366: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:36:21.954: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:41:52.598: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:47:23.186: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:52:53.830: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:58:24.418: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:03:55.062: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:25.650: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:30.022: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 05:14:56.294: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:20:26.882: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:25:57.526: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:31:28.114: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:36:58.758: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:42:29.346: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:47:59.990: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:53:30.578: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:59:01.222: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:04:31.810: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:10:02.454: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:15:33.042: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.###show power
+ ^
+% Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+Embedded-Service-Engine0/0 unassigned YES unset administratively down down
+GigabitEthernet0/0 unassigned YES unset up up
+GigabitEthernet0/1 unassigned YES unset down down
+GigabitEthernet0/2 unassigned YES unset down down ^
+% Invalid input detected at '^' marker.
+configure terminal
+Enter configuration commands, one per line. End with CNTL/Z.
+Router(config)#interface range GigabitEthernet0/0-2
+Router(config-if-range)#no shut
+Router(config-if-range)#end
+Router#
+
+
+=============================================================DPELP=============================================================
+PID: ASA5516 , VID: V06 , SN: JMX1936Z0XM
+RAM: 8.00G (Default N/A)
+Flash: 8.00G (Default N/A)
+=================================================================
+
+iscoasa###show inv
+Name: "Chassis", DESCR: "ASA 5516-X with FirePOWER services, 8GE, AC, DES"
+PID: ASA5516 , VID: V06 , SN: JMX1936Z0XM
+
+
ciscoasa###show version
+
+Cisco Adaptive Security Appliance Software Version 9.5(1)
+
+Compiled on Wed 12-Aug-15 12:18 PDT by builders
+System image file is "disk0:/asa951-lfbff-k8.SPA"
+Config file at boot was "startup-config"
+
+ciscoasa up 9 days 0 hours
+
+Hardware: ASA5516, 8192 MB RAM, CPU Atom C2000 series 2416 MHz, 1 CPU (8 cores)
+Internal ATA Compact Flash, 8192MB
+BIOS Flash unknown @ 0x0, 0KB
+
+Encryption hardware device : Cisco ASA Crypto on-board accelerator (revision 0x1)
+ Number of accelerators: 1
+
+ 1: Ext: GigabitEthernet1/1 : address is ecbd.1d5f.a632, irq 255
+ 2: Ext: GigabitEthernet1/2 : address is ecbd.1d5f.a633, irq 255
+ 3: Ext: GigabitEthernet1/3 : address is ecbd.1d5f.a634, irq 255
+ 4: Ext: GigabitEthernet1/4 : address is ecbd.1d5f.a635, irq 255
+ 5: Ext: GigabitEthernet1/5 : address is ecbd.1d5f.a636, irq 255
+ 6: Ext: GigabitEthernet1/6 : address is ecbd.1d5f.a637, irq 255
+ 7: Ext: GigabitEthernet1/7 : address is ecbd.1d5f.a638, irq 255
+ 8: Ext: GigabitEthernet1/8 : address is ecbd.1d5f.a639, irq 255
+ 9: Int: Internal-Data1/1 : address is ecbd.1d5f.a631, irq 255
+<--- More --->
10: Int: Internal-Data1/2 : address is 0000.0001.0002, irq 0
+11: Int: Internal-Control1/1 : address is 0000.0001.0001, irq 0
+12: Int: Internal-Data1/3 : address is 0000.0001.0003, irq 0
+13: Ext: Management1/1 : address is ecbd.1d5f.a631, irq 0
+The Running Activation Key feature: 500 AnyConnect Premium sessions exceed the limit on the platform, reduced to 300 AnyConnect Premium sessions.
+
+Licensed features for this platform:
+Maximum Physical Interfaces : Unlimited perpetual
+Maximum VLANs : 150 perpetual
+Inside Hosts : Unlimited perpetual
+Failover : Active/Active perpetual
+Encryption-DES : Enabled perpetual
+Encryption-3DES-AES : Enabled perpetual
+Security Contexts : 2 perpetual
+GTP/GPRS : Disabled perpetual
+AnyConnect Premium Peers : 300 perpetual
+AnyConnect Essentials : Disabled perpetual
+Other VPN Peers : 300 perpetual
+Total VPN Peers : 300 perpetual
+Shared License : Disabled perpetual
+AnyConnect for Mobile : Enabled perpetual
+AnyConnect for Cisco VPN Phone : Enabled perpetual
+Advanced Endpoint Assessment : Enabled perpetual
+Total UC Proxy Sessions : 1000 perpetual
+<--- More --->
Botnet Traffic Filter : Disabled perpetual
+<--- More --->
Cluster : Disabled perpetual
+VPN Load Balancing : Enabled perpetual
+
+Serial Number: JAD193302L9
+Running Permanent Activation Key: 0x803fd871 0x648697a2 0x88b2913c 0xbf282ce4 0x8233308c
+Configuration register is 0x1
+Image type : Release
+Key Version : A
+Configuration last modified by enable_15 at 06:04:08.532 UTC Wed Sep 20 2023
+
ciscoasa# diag
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa###show env all
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa###show log
+Syslog logging: disabled
+ Facility: 20
+ Timestamp logging: disabled
+ Hide Username logging: enabled
+ Standby logging: disabled
+ Debug-trace logging: disabled
+ Console logging: disabled
+ Monitor logging: disabled
+ Buffer logging: disabled
+ Trap logging: disabled
+ Permit-hostdown logging: disabled
+ History logging: disabled
+ Device ID: disabled
+ Mail logging: disabled
+ ASDM logging: disabled
+
ciscoasa###show power
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa#
+
ciscoasa#
+
ciscoasa#
+
ciscoasa#
+[Connection to p3 closed by foreign host]
+AU-dev#
+ ^
+ERROR: % Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+GigabitEthernet1/1 unassigned YES unset down down
+GigabitEthernet1/2 unassigned YES unset down down
+GigabitEthernet1/3 unassigned YES unset down down
+GigabitEthernet1/4 unassigned YES unset down down
+GigabitEthernet1/5 unassigned YES unset down down
+GigabitEthernet1/6 unassigned YES unset down down
+GigabitEthernet1/7 unassigned YES unset down down
+GigabitEthernet1/8 unassigned YES unset down down
+Internal-Control1/1 127.0.1.1 YES unset up up
+Internal-Data1/1 unassigned YES unset up down
+Internal-Data1/2 unassigned YES unset down down
+Internal-Data1/3 unassigned YES unset up up
+Management1/1 unassigned YES unset down down
+ configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/1
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/2
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/3
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/4
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/5
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/6
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/7
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/8
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Control1/1
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/1
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/2
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/3
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Management1/1
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa#
+Finish
+
+
+
+=============================================================DPELP=============================================================
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+RAM: 0.46G (Default 0.40G)
+Flash: 0.24G (Default N/A)
+=================================================================
+
+Router####show inv
+NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL174510ZN, Hw Revision: 1.0"
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+
+NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
+PID: PWR-2911-POE , VID: V02 , SN: ART1904F3KX
+
+###show ver
+Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
+
+Technical Support: http://www.cisco.com/techsupport
+Copyright (c) 1986-2013 by Cisco Systems, Inc.
+Compiled Thu 20-Jun-13 13:06 by prod_rel_team
+
+ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
+
+Router uptime is 1 week, 2 days, 51 minutes
+System returned to ROM by power-on
+System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M4.bin"
+Last reload type: Normal Reload
+Last reload reason: power-on
+
+
+
+This product contains cryptographic features and is subject to United
+States and local country laws governing import, export, transfer and
+use. Delivery of Cisco cryptographic products does not imply
+third-party authority to import, export, distribute or use encryption.
+Importers, exporters, distributors and users are responsible for
+compliance with U.S. and local country laws. By using this product you
+agree to comply with applicable laws and regulations. If you are unable
+to comply with U.S. and local laws, return this product immediately.
+
+A summary of U.S. laws governing Cisco cryptographic products may be found at:
+http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
+
+If you require further assistance please contact us by sending email to
+export@cisco.com.
+
+Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory.
+Processor board ID FGL174510ZN
+3 Gigabit Ethernet interfaces
+1 terminal line
+1 Virtual Private Network (VPN) Module
+DRAM configuration is 64 bits wide with parity enabled.
+255K bytes of non-volatile configuration memory.
+250880K bytes of ATA System CompactFlash 0 (Read/Write)
+
+
+License Info:
+
+License UDI:
+
+-------------------------------------------------
+Device# PID SN
+-------------------------------------------------
+*0 CISCO2911/K9 FGL174510ZN
+
+
+
+Technology Package License Information for Module:'c2900'
+
+-----------------------------------------------------------------
+Technology Technology-package Technology-package
+ Current Type Next reboot
+------------------------------------------------------------------
+ipbase ipbasek9 Permanent ipbasek9
+security securityk9 Permanent securityk9
+uc uck9 Permanent uck9
+data None None None
+
+Configuration register is 0x2142
+###show diag
+Slot 0:
+ C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 3 ports
+ Port adapter is analyzed
+ Port adapter insertion time 1w2d ago
+ EEPROM contents at hardware discovery:
+ PCB Serial Number : FOC17428K3K
+ Hardware Revision : 1.0
+ Part Number : 73-11833-11
+ Top Assy. Part Number : 800-30797-06
+ Board Revision : C1
+ Deviation Number : 130603
+ Fab Version : 03
+ Product (FRU) Number : CISCO2911/K9
+ Version Identifier : V07
+ CLEI Code : CMMJD00ARA
+ Processor type : C1
+ Chassis Serial Number : FGL174510ZN
+ Chassis MAC Address : 78da.6e42.4a48
+ MAC Address block size : 80
+ Manufacturing Test Data : 00 00 00 00 00 00 00 00
+ EEPROM format version 4
+
+ EEPROM contents (hex):
+ 0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 38 4B 33 4B 40
+ 0x10: 06 18 41 01 00 82 49 2E 39 0B C0 46 03 20 00 78
+ 0x20: 4D 06 42 43 31 88 00 01 FE 2B 02 03 CB 8C 43 49
+ 0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 37 20 D9
+ 0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 44 30 30 41 52
+ 0x50: 41 09 C1 C2 8B 46 47 4C 31 37 34 35 31 30 5A 4E
+ 0x60: C3 06 78 DA 6E 42 4A 48 43 00 50 C4 08 00 00 00
+ 0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
+ 0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ Internal Power Supply information
+ Top Assy. Part Number : 341-0236-04
+ Deviation Number : 0
+ PCB Serial Number : ART1904F3KX
+ RMA Test History : 00
+ RMA Number : 0-0-0-0
+ RMA History : 00
+ Version Identifier : V02
+ Product (FRU) Number : PWR-2911-POE
+ CLEI Code : COUPAFRBAB
+ Board Revision : A0
+ EEPROM format version 4
+ EEPROM contents (hex):
+ 0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 04 88 00 00 00
+ 0x10: 00 C1 8B 41 52 54 31 39 30 34 46 33 4B 58 03 00
+ 0x20: 81 00 00 00 00 04 00 89 56 30 32 20 CB 8C 50 57
+ 0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 43 4F 55 50
+ 0x40: 41 46 52 42 41 42 F3 00 59 41 01 86 42 00 05 F8
+ 0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
+ 0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
+ 0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
+ 0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
+ 0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
+ 0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+
+
+Embedded Service Engine 0/0 :
+ Total platform memory : 524288K bytes
+ Total 2nd core memory : 0K bytes
+ Start of physical address for 2nd core : 0x80000000
+ Virtual address start of 2nd core memory : 0x0 - 0x0
+ 2nd core configured disabled
+ L2 cache ways for 2nd core : 0
+###show post
+ ^
+% Invalid input detected at '^' marker.
+###show env all
+SYSTEM POWER SUPPLY STATUS
+==========================
+ Internal Power Supply Type: AC-POE
+ Internal Power Supply 12V Output Status: Normal
+ Internal Power Supply POE -48V Voltage Status: Normal
+
+ External Redundant Power Supply is absent or powered off
+
+SYSTEM FAN STATUS
+=================
+ Fan Rotation Alert: Total 2 Fan Low RPM
+ Fan 1 OK, Maximum speed setting
+ Fan 2 OK, Maximum speed setting
+ Fan 3 OK, Maximum speed setting
+ Fan 4 Low RPM
+
+SYSTEM TEMPERATURE STATUS
+=========================
+ Intake Left(Bezel) temperature: 29 Celsius, Normal
+ Intake Left temperature: 30 Celsius, Normal
+ Exhaust Right(Bezel) temperature: 34 Celsius, Normal
+ Exhaust Right temperature: 31 Celsius, Normal
+ CPU temperature: 52 Celsius, Normal
+ Power Supply Unit temperature: 31 Celsius, Normal
+
+REAL TIME CLOCK BATTERY STATUS
+==============================
+ Battery OK (checked at power up)
+
+SYSTEM POWER
+===============
+ Motherboard Components Power consumption = 82.6 W
+ Total System Power consumption is: 82.6 W
+
+ Environmental information last updated 00:00:24 ago
+###show logging
+Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
+
+No Active Message Discriminator.
+
+
+
+No Inactive Message Discriminator.
+
+
+ Console logging: level debugging, 1914 messages logged, xml disabled,
+ filtering disabled
+ Monitor logging: level debugging, 0 messages logged, xml disabled,
+ filtering disabled
+ Buffer logging: level debugging, 1914 messages logged, xml disabled,
+ filtering disabled
+ Exception Logging: size (4096 bytes)
+ Count and timestamp logging messages: disabled
+ Persistent logging: disabled
+
+No active filter modules.
+
+ Trap logging: level informational, 1917 message lines logged
+ Logging Source-Interface: VRF Name:
+
+Log Buffer (8192 bytes):
+ Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:02:41.511: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:08:12.099: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:13:42.743: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:19:13.331: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:24:43.975: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:30:14.563: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:35:45.207: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:41:15.795: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:46:46.439: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:52:17.027: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:57:47.670: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:03:18.258: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:08:48.902: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:14:19.490: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:19:50.134: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:25:20.722: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:30:51.366: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:36:21.954: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:41:52.598: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:47:23.186: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:52:53.830: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:58:24.418: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:03:55.062: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:25.650: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:30.022: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 05:14:56.294: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:20:26.882: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:25:57.526: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:31:28.114: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:36:58.758: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:42:29.346: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:47:59.990: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:53:30.578: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:59:01.222: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:04:31.810: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:10:02.454: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:15:33.042: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:20:37.922: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 06:21:03.686: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:26:34.274: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:32:04.918: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:37:35.506: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:43:06.150: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:48:36.738: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:54:07.382: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:59:37.970: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 07:05:08.614: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 07:10:39.202: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.###show power
+ ^
+% Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+Embedded-Service-Engine0/0 unassigned YES unset administratively down down
+GigabitEthernet0/0 unassigned YES unset up up
+GigabitEthernet0/1 unassigned YES unset down down
+GigabitEthernet0/2 unassigned YES unset down down ^
+% Invalid input detected at '^' marker.
+configure terminal
+Enter configuration commands, one per line. End with CNTL/Z.
+Router(config)#interface range GigabitEthernet0/0-2
+Router(config-if-range)#no shut
+Router(config-if-range)#end
+Router#
+
+
+=============================================================DPELP=============================================================
+PID: ASA5516 , VID: V06 , SN: JMX1936Z0XM
+RAM: 8.00G (Default N/A)
+Flash: 8.00G (Default N/A)
+=================================================================
+
+iscoasa###show inv
+Name: "Chassis", DESCR: "ASA 5516-X with FirePOWER services, 8GE, AC, DES"
+PID: ASA5516 , VID: V06 , SN: JMX1936Z0XM
+
+
ciscoasa###show version
+
+Cisco Adaptive Security Appliance Software Version 9.5(1)
+
+Compiled on Wed 12-Aug-15 12:18 PDT by builders
+System image file is "disk0:/asa951-lfbff-k8.SPA"
+Config file at boot was "startup-config"
+
+ciscoasa up 9 days 0 hours
+
+Hardware: ASA5516, 8192 MB RAM, CPU Atom C2000 series 2416 MHz, 1 CPU (8 cores)
+Internal ATA Compact Flash, 8192MB
+BIOS Flash unknown @ 0x0, 0KB
+
+Encryption hardware device : Cisco ASA Crypto on-board accelerator (revision 0x1)
+ Number of accelerators: 1
+
+ 1: Ext: GigabitEthernet1/1 : address is ecbd.1d5f.a632, irq 255
+ 2: Ext: GigabitEthernet1/2 : address is ecbd.1d5f.a633, irq 255
+ 3: Ext: GigabitEthernet1/3 : address is ecbd.1d5f.a634, irq 255
+ 4: Ext: GigabitEthernet1/4 : address is ecbd.1d5f.a635, irq 255
+ 5: Ext: GigabitEthernet1/5 : address is ecbd.1d5f.a636, irq 255
+ 6: Ext: GigabitEthernet1/6 : address is ecbd.1d5f.a637, irq 255
+ 7: Ext: GigabitEthernet1/7 : address is ecbd.1d5f.a638, irq 255
+ 8: Ext: GigabitEthernet1/8 : address is ecbd.1d5f.a639, irq 255
+ 9: Int: Internal-Data1/1 : address is ecbd.1d5f.a631, irq 255
+<--- More --->
10: Int: Internal-Data1/2 : address is 0000.0001.0002, irq 0
+11: Int: Internal-Control1/1 : address is 0000.0001.0001, irq 0
+12: Int: Internal-Data1/3 : address is 0000.0001.0003, irq 0
+13: Ext: Management1/1 : address is ecbd.1d5f.a631, irq 0
+The Running Activation Key feature: 500 AnyConnect Premium sessions exceed the limit on the platform, reduced to 300 AnyConnect Premium sessions.
+
+Licensed features for this platform:
+Maximum Physical Interfaces : Unlimited perpetual
+Maximum VLANs : 150 perpetual
+Inside Hosts : Unlimited perpetual
+Failover : Active/Active perpetual
+Encryption-DES : Enabled perpetual
+Encryption-3DES-AES : Enabled perpetual
+Security Contexts : 2 perpetual
+GTP/GPRS : Disabled perpetual
+AnyConnect Premium Peers : 300 perpetual
+AnyConnect Essentials : Disabled perpetual
+Other VPN Peers : 300 perpetual
+Total VPN Peers : 300 perpetual
+Shared License : Disabled perpetual
+AnyConnect for Mobile : Enabled perpetual
+AnyConnect for Cisco VPN Phone : Enabled perpetual
+Advanced Endpoint Assessment : Enabled perpetual
+Total UC Proxy Sessions : 1000 perpetual
+<--- More --->
Botnet Traffic Filter : Disabled perpetual
+<--- More --->
Cluster : Disabled perpetual
+VPN Load Balancing : Enabled perpetual
+
+Serial Number: JAD193302L9
+Running Permanent Activation Key: 0x803fd871 0x648697a2 0x88b2913c 0xbf282ce4 0x8233308c
+Configuration register is 0x1
+Image type : Release
+Key Version : A
+Configuration last modified by enable_15 at 07:15:15.832 UTC Wed Sep 20 2023
+
ciscoasa# diag
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa###show env all
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa###show log
+Syslog logging: disabled
+ Facility: 20
+ Timestamp logging: disabled
+ Hide Username logging: enabled
+ Standby logging: disabled
+ Debug-trace logging: disabled
+ Console logging: disabled
+ Monitor logging: disabled
+ Buffer logging: disabled
+ Trap logging: disabled
+ Permit-hostdown logging: disabled
+ History logging: disabled
+ Device ID: disabled
+ Mail logging: disabled
+ ASDM logging: disabled
+
ciscoasa###show power
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
ciscoasa#
+
ciscoasa#
+
ciscoasa#
+
ciscoasa#
+[Connection to p3 closed by foreign host]
+AU-dev#
+ ^
+ERROR: % Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+GigabitEthernet1/1 unassigned YES unset down down
+GigabitEthernet1/2 unassigned YES unset down down
+GigabitEthernet1/3 unassigned YES unset down down
+GigabitEthernet1/4 unassigned YES unset down down
+GigabitEthernet1/5 unassigned YES unset down down
+GigabitEthernet1/6 unassigned YES unset down down
+GigabitEthernet1/7 unassigned YES unset down down
+GigabitEthernet1/8 unassigned YES unset down down
+Internal-Control1/1 127.0.1.1 YES unset up up
+Internal-Data1/1 unassigned YES unset up down
+Internal-Data1/2 unassigned YES unset down down
+Internal-Data1/3 unassigned YES unset up up
+Management1/1 unassigned YES unset down down
+ configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/1
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/2
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/3
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/4
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/5
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/6
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/7
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface GigabitEthernet1/8
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Control1/1
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/1
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/2
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Internal-Data1/3
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config)# no shut
+ ^
+ERROR: % Invalid input detected at '^' marker.
+
+ciscoasa(config
+
+ciscoasa(config)# end
+
+ciscoasa# configure terminal
+
+ciscoasa(config)# interface Management1/1
+
+ciscoasa(config-if)# no shut
+
+ciscoasa(config-if)# end
+
+ciscoasa#
+Finish
diff --git a/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-06-44-42.log b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-06-44-42.log
new file mode 100644
index 0000000..a672b56
--- /dev/null
+++ b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-06-44-42.log
@@ -0,0 +1,284 @@
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+RAM: 0.46G (Default 0.40G)
+Flash: 0.24G (Default N/A)
+=================================================================
+
+Router####show inv
+NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL174510ZN, Hw Revision: 1.0"
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+
+NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
+PID: PWR-2911-POE , VID: V02 , SN: ART1904F3KX
+
+###show ver
+Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
+
+Technical Support: http://www.cisco.com/techsupport
+Copyright (c) 1986-2013 by Cisco Systems, Inc.
+Compiled Thu 20-Jun-13 13:06 by prod_rel_team
+
+ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
+
+Router uptime is 1 week, 2 days, 0 minutes
+System returned to ROM by power-on
+
+System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M4.bin"
+Last reload type: Normal Reload
+Last reload reason: power-on
+
+
+
+This product contains cryptographic features and is subject to United
+States and local country laws governing import, export, transfer and
+use. Delivery of Cisco cryptographic products does not imply
+third-party authority to import, export, distribute or use encryption.
+Importers, exporters, distributors and users are responsible for
+compliance with U.S. and local country laws. By using this product you
+agree to comply with applicable laws and regulations. If you are unable
+to comply with U.S. and local laws, return this product immediately.
+
+A summary of U.S. laws governing Cisco cryptographic products may be found at:
+http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
+
+If you require further assistance please contact us by sending email to
+export@cisco.com.
+
+Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory.
+
+Processor board ID FGL174510ZN
+3 Gigabit Ethernet interfaces
+1 terminal line
+1 Virtual Private Network (VPN) Module
+DRAM configuration is 64 bits wide with parity enabled.
+255K bytes of non-volatile configuration memory.
+250880K bytes of ATA System CompactFlash 0 (Read/Write)
+
+
+License Info:
+
+License UDI:
+
+-------------------------------------------------
+Device# PID SN
+-------------------------------------------------
+*0 CISCO2911/K9 FGL174510ZN
+
+
+
+Technology Package License Information for Module:'c2900'
+
+-----------------------------------------------------------------
+Technology Technology-package Technology-package
+ Current Type Next reboot
+------------------------------------------------------------------
+ipbase ipbasek9 Permanent ipbasek9
+security securityk9 Permanent securityk9
+uc uck9 Permanent uck9
+data None None None
+
+Configuration register is 0x2142
+###show diag
+Slot 0:
+ C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 3 ports
+ Port adapter is analyzed
+ Port adapter insertion time 1w1d ago
+ EEPROM contents at hardware discovery:
+ PCB Serial Number : FOC17428K3K
+ Hardware Revision : 1.0
+ Part Number : 73-11833-11
+ Top Assy. Part Number : 800-30797-06
+ Board Revision : C1
+ Deviation Number : 130603
+ Fab Version : 03
+ Product (FRU) Number : CISCO2911/K9
+ Version Identifier : V07
+ CLEI Code : CMMJD00ARA
+ Processor type : C1
+ Chassis Serial Number : FGL174510ZN
+ Chassis MAC Address : 78da.6e42.4a48
+ MAC Address block size : 80
+ Manufacturing Test Data : 00 00 00 00 00 00 00 00
+ EEPROM format version 4
+
+ EEPROM contents (hex):
+ 0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 38 4B 33 4B 40
+ 0x10: 06 18 41 01 00 82 49 2E 39 0B C0 46 03 20 00 78
+ 0x20: 4D 06 42 43 31 88 00 01 FE 2B 02 03 CB 8C 43 49
+ 0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 37 20 D9
+ 0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 44 30 30 41 52
+ 0x50: 41 09 C1 C2 8B 46 47 4C 31 37 34 35 31 30 5A 4E
+ 0x60: C3 06 78 DA 6E 42 4A 48 43 00 50 C4 08 00 00 00
+ 0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
+ 0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ Internal Power Supply information
+ Top Assy. Part Number : 341-0236-04
+ Deviation Number : 0
+ PCB Serial Number : ART1904F3KX
+ RMA Test History : 00
+ RMA Number : 0-0-0-0
+ RMA History : 00
+ Version Identifier : V02
+ Product (FRU) Number : PWR-2911-POE
+ CLEI Code : COUPAFRBAB
+ Board Revision : A0
+ EEPROM format version 4
+ EEPROM contents (hex):
+ 0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 04 88 00 00 00
+ 0x10: 00 C1 8B 41 52 54 31 39 30 34 46 33 4B 58 03 00
+ 0x20: 81 00 00 00 00 04 00 89 56 30 32 20 CB 8C 50 57
+ 0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 43 4F 55 50
+ 0x40: 41 46 52 42 41 42 F3 00 59 41 01 86 42 00 05 F8
+ 0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
+ 0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
+ 0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
+ 0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
+ 0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
+ 0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+
+
+Embedded Service Engine 0/0 :
+ Total platform memory : 524288K bytes
+ Total 2nd core memory : 0K bytes
+ Start of physical address for 2nd core : 0x80000000
+ Virtual address start of 2nd core memory : 0x0 - 0x0
+ 2nd core configured disabled
+ L2 cache ways for 2nd core : 0
+###show post
+ ^
+% Invalid input detected at '^' marker.
+###show env all
+SYSTEM POWER SUPPLY STATUS
+==========================
+ Internal Power Supply Type: AC-POE
+ Internal Power Supply 12V Output Status: Normal
+ Internal Power Supply POE -48V Voltage Status: Normal
+
+ External Redundant Power Supply is absent or powered off
+
+SYSTEM FAN STATUS
+=================
+ Fan Rotation Alert: Total 2 Fan Low RPM
+ Fan 1 OK, Maximum speed setting
+ Fan 2 OK, Maximum speed setting
+ Fan 3 OK, Maximum speed setting
+ Fan 4 Low RPM
+
+SYSTEM TEMPERATURE STATUS
+=========================
+ Intake Left(Bezel) temperature: 29 Celsius, Normal
+ Intake Left temperature: 30 Celsius, Normal
+ Exhaust Right(Bezel) temperature: 33 Celsius, Normal
+ Exhaust Right temperature: 31 Celsius, Normal
+ CPU temperature: 52 Celsius, Normal
+ Power Supply Unit temperature: 31 Celsius, Normal
+
+REAL TIME CLOCK BATTERY STATUS
+==============================
+ Battery OK (checked at power up)
+
+SYSTEM POWER
+===============
+ Motherboard Components Power consumption = 82.2 W
+ Total System Power consumption is: 82.2 W
+
+ Environmental information last updated 00:00:20 ago
+###show logging
+Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
+
+No Active Message Discriminator.
+
+
+
+No Inactive Message Discriminator.
+
+
+ Console logging: level debugging, 1903 messages logged, xml disabled,
+ filtering disabled
+ Monitor logging: level debugging, 0 messages logged, xml disabled,
+ filtering disabled
+ Buffer logging: level debugging, 1903 messages logged, xml disabled,
+ filtering disabled
+ Exception Logging: size (4096 bytes)
+ Count and timestamp logging messages: disabled
+ Persistent logging: disabled
+
+No active filter modules.
+
+ Trap logging: level informational, 1906 message lines logged
+ Logging Source-Interface: VRF Name:
+
+Log Buffer (8192 bytes):
+2:04.707: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:07:35.351: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:13:05.939: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:18:36.583: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:24:07.171: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:29:37.815: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:35:08.403: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:40:39.047: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:46:09.635: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:51:40.279: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 02:57:10.867: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:02:41.511: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:08:12.099: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:13:42.743: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:19:13.331: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:24:43.975: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:30:14.563: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:35:45.207: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:41:15.795: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:46:46.439: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:52:17.027: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:57:47.670: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:03:18.258: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:08:48.902: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:14:19.490: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:19:50.134: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:25:20.722: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:30:51.366: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:36:21.954: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:41:52.598: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:47:23.186: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:52:53.830: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:58:24.418: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:03:55.062: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:25.650: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:30.022: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 05:14:56.294: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:20:26.882: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:25:57.526: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:31:28.114: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:36:58.758: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:42:29.346: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:47:59.990: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:53:30.578: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:59:01.222: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:04:31.810: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:10:02.454: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:15:33.042: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.###show power
+ ^
+% Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+Embedded-Service-Engine0/0 unassigned YES unset administratively down down
+GigabitEthernet0/0 unassigned YES unset up up
+GigabitEthernet0/1 unassigned YES unset down down
+GigabitEthernet0/2 unassigned YES unset down down ^
+% Invalid input detected at '^' marker.
+configure terminal
+Enter configuration commands, one per line. End with CNTL/Z.
+Router(config)#interface range GigabitEthernet0/0-2
+Router(config-if-range)#no shut
+Router(config-if-range)#end
+Router#
\ No newline at end of file
diff --git a/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-07-35-50.log b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-07-35-50.log
new file mode 100644
index 0000000..a010c6a
--- /dev/null
+++ b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port2-07-35-50.log
@@ -0,0 +1,283 @@
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+RAM: 0.46G (Default 0.40G)
+Flash: 0.24G (Default N/A)
+=================================================================
+
+Router####show inv
+NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL174510ZN, Hw Revision: 1.0"
+PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
+
+NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
+PID: PWR-2911-POE , VID: V02 , SN: ART1904F3KX
+
+###show ver
+Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
+
+Technical Support: http://www.cisco.com/techsupport
+Copyright (c) 1986-2013 by Cisco Systems, Inc.
+Compiled Thu 20-Jun-13 13:06 by prod_rel_team
+
+ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
+
+Router uptime is 1 week, 2 days, 51 minutes
+System returned to ROM by power-on
+System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M4.bin"
+Last reload type: Normal Reload
+Last reload reason: power-on
+
+
+
+This product contains cryptographic features and is subject to United
+States and local country laws governing import, export, transfer and
+use. Delivery of Cisco cryptographic products does not imply
+third-party authority to import, export, distribute or use encryption.
+Importers, exporters, distributors and users are responsible for
+compliance with U.S. and local country laws. By using this product you
+agree to comply with applicable laws and regulations. If you are unable
+to comply with U.S. and local laws, return this product immediately.
+
+A summary of U.S. laws governing Cisco cryptographic products may be found at:
+http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
+
+If you require further assistance please contact us by sending email to
+export@cisco.com.
+
+Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory.
+Processor board ID FGL174510ZN
+3 Gigabit Ethernet interfaces
+1 terminal line
+1 Virtual Private Network (VPN) Module
+DRAM configuration is 64 bits wide with parity enabled.
+255K bytes of non-volatile configuration memory.
+250880K bytes of ATA System CompactFlash 0 (Read/Write)
+
+
+License Info:
+
+License UDI:
+
+-------------------------------------------------
+Device# PID SN
+-------------------------------------------------
+*0 CISCO2911/K9 FGL174510ZN
+
+
+
+Technology Package License Information for Module:'c2900'
+
+-----------------------------------------------------------------
+Technology Technology-package Technology-package
+ Current Type Next reboot
+------------------------------------------------------------------
+ipbase ipbasek9 Permanent ipbasek9
+security securityk9 Permanent securityk9
+uc uck9 Permanent uck9
+data None None None
+
+Configuration register is 0x2142
+###show diag
+Slot 0:
+ C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 3 ports
+ Port adapter is analyzed
+ Port adapter insertion time 1w2d ago
+ EEPROM contents at hardware discovery:
+ PCB Serial Number : FOC17428K3K
+ Hardware Revision : 1.0
+ Part Number : 73-11833-11
+ Top Assy. Part Number : 800-30797-06
+ Board Revision : C1
+ Deviation Number : 130603
+ Fab Version : 03
+ Product (FRU) Number : CISCO2911/K9
+ Version Identifier : V07
+ CLEI Code : CMMJD00ARA
+ Processor type : C1
+ Chassis Serial Number : FGL174510ZN
+ Chassis MAC Address : 78da.6e42.4a48
+ MAC Address block size : 80
+ Manufacturing Test Data : 00 00 00 00 00 00 00 00
+ EEPROM format version 4
+
+ EEPROM contents (hex):
+ 0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 38 4B 33 4B 40
+ 0x10: 06 18 41 01 00 82 49 2E 39 0B C0 46 03 20 00 78
+ 0x20: 4D 06 42 43 31 88 00 01 FE 2B 02 03 CB 8C 43 49
+ 0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 37 20 D9
+ 0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 44 30 30 41 52
+ 0x50: 41 09 C1 C2 8B 46 47 4C 31 37 34 35 31 30 5A 4E
+ 0x60: C3 06 78 DA 6E 42 4A 48 43 00 50 C4 08 00 00 00
+ 0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
+ 0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ Internal Power Supply information
+ Top Assy. Part Number : 341-0236-04
+ Deviation Number : 0
+ PCB Serial Number : ART1904F3KX
+ RMA Test History : 00
+ RMA Number : 0-0-0-0
+ RMA History : 00
+ Version Identifier : V02
+ Product (FRU) Number : PWR-2911-POE
+ CLEI Code : COUPAFRBAB
+ Board Revision : A0
+ EEPROM format version 4
+ EEPROM contents (hex):
+ 0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 04 88 00 00 00
+ 0x10: 00 C1 8B 41 52 54 31 39 30 34 46 33 4B 58 03 00
+ 0x20: 81 00 00 00 00 04 00 89 56 30 32 20 CB 8C 50 57
+ 0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 43 4F 55 50
+ 0x40: 41 46 52 42 41 42 F3 00 59 41 01 86 42 00 05 F8
+ 0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
+ 0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
+ 0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
+ 0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
+ 0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
+ 0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
+ 0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+ 0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+
+
+Embedded Service Engine 0/0 :
+ Total platform memory : 524288K bytes
+ Total 2nd core memory : 0K bytes
+ Start of physical address for 2nd core : 0x80000000
+ Virtual address start of 2nd core memory : 0x0 - 0x0
+ 2nd core configured disabled
+ L2 cache ways for 2nd core : 0
+###show post
+ ^
+% Invalid input detected at '^' marker.
+###show env all
+SYSTEM POWER SUPPLY STATUS
+==========================
+ Internal Power Supply Type: AC-POE
+ Internal Power Supply 12V Output Status: Normal
+ Internal Power Supply POE -48V Voltage Status: Normal
+
+ External Redundant Power Supply is absent or powered off
+
+SYSTEM FAN STATUS
+=================
+ Fan Rotation Alert: Total 2 Fan Low RPM
+ Fan 1 OK, Maximum speed setting
+ Fan 2 OK, Maximum speed setting
+ Fan 3 OK, Maximum speed setting
+ Fan 4 Low RPM
+
+SYSTEM TEMPERATURE STATUS
+=========================
+ Intake Left(Bezel) temperature: 29 Celsius, Normal
+ Intake Left temperature: 30 Celsius, Normal
+ Exhaust Right(Bezel) temperature: 34 Celsius, Normal
+ Exhaust Right temperature: 31 Celsius, Normal
+ CPU temperature: 52 Celsius, Normal
+ Power Supply Unit temperature: 31 Celsius, Normal
+
+REAL TIME CLOCK BATTERY STATUS
+==============================
+ Battery OK (checked at power up)
+
+SYSTEM POWER
+===============
+ Motherboard Components Power consumption = 82.6 W
+ Total System Power consumption is: 82.6 W
+
+ Environmental information last updated 00:00:24 ago
+###show logging
+Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
+
+No Active Message Discriminator.
+
+
+
+No Inactive Message Discriminator.
+
+
+ Console logging: level debugging, 1914 messages logged, xml disabled,
+ filtering disabled
+ Monitor logging: level debugging, 0 messages logged, xml disabled,
+ filtering disabled
+ Buffer logging: level debugging, 1914 messages logged, xml disabled,
+ filtering disabled
+ Exception Logging: size (4096 bytes)
+ Count and timestamp logging messages: disabled
+ Persistent logging: disabled
+
+No active filter modules.
+
+ Trap logging: level informational, 1917 message lines logged
+ Logging Source-Interface: VRF Name:
+
+Log Buffer (8192 bytes):
+ Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:02:41.511: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:08:12.099: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:13:42.743: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:19:13.331: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:24:43.975: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:30:14.563: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:35:45.207: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:41:15.795: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:46:46.439: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:52:17.027: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 03:57:47.670: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:03:18.258: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:08:48.902: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:14:19.490: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:19:50.134: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:25:20.722: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:30:51.366: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:36:21.954: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:41:52.598: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:47:23.186: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:52:53.830: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 04:58:24.418: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:03:55.062: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:25.650: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:09:30.022: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 05:14:56.294: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:20:26.882: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:25:57.526: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:31:28.114: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:36:58.758: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:42:29.346: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:47:59.990: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:53:30.578: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 05:59:01.222: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:04:31.810: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:10:02.454: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:15:33.042: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:20:37.922: %SYS-5-CONFIG_I: Configured from console by console
+*Sep 20 06:21:03.686: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:26:34.274: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:32:04.918: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:37:35.506: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:43:06.150: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:48:36.738: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:54:07.382: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 06:59:37.970: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 07:05:08.614: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
+*Sep 20 07:10:39.202: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.###show power
+ ^
+% Invalid input detected at '^' marker.
+Interface IP-Address OK? Method Status Protocol
+Embedded-Service-Engine0/0 unassigned YES unset administratively down down
+GigabitEthernet0/0 unassigned YES unset up up
+GigabitEthernet0/1 unassigned YES unset down down
+GigabitEthernet0/2 unassigned YES unset down down ^
+% Invalid input detected at '^' marker.
+configure terminal
+Enter configuration commands, one per line. End with CNTL/Z.
+Router(config)#interface range GigabitEthernet0/0-2
+Router(config-if-range)#no shut
+Router(config-if-range)#end
+Router#
\ No newline at end of file
diff --git a/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-06-44-50.log b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-06-44-50.log
new file mode 100644
index 0000000..d6ec0e3
Binary files /dev/null and b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-06-44-50.log differ
diff --git a/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-07-35-59.log b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-07-35-59.log
new file mode 100644
index 0000000..e631984
Binary files /dev/null and b/netmiko_Api/public/filesTest/20230920-AUTO-Session.AU-dev.Port3-07-35-59.log differ
diff --git a/netmiko_client/build/asset-manifest.json b/netmiko_client/build/asset-manifest.json
index dd33f4c..9651ea6 100644
--- a/netmiko_client/build/asset-manifest.json
+++ b/netmiko_client/build/asset-manifest.json
@@ -1,15 +1,15 @@
{
"files": {
- "main.css": "/static/css/main.38044ab5.css",
- "main.js": "/static/js/main.a040a512.js",
+ "main.css": "/static/css/main.e5571b18.css",
+ "main.js": "/static/js/main.6cf9f33e.js",
"static/js/787.49f8686c.chunk.js": "/static/js/787.49f8686c.chunk.js",
"index.html": "/index.html",
- "main.38044ab5.css.map": "/static/css/main.38044ab5.css.map",
- "main.a040a512.js.map": "/static/js/main.a040a512.js.map",
+ "main.e5571b18.css.map": "/static/css/main.e5571b18.css.map",
+ "main.6cf9f33e.js.map": "/static/js/main.6cf9f33e.js.map",
"787.49f8686c.chunk.js.map": "/static/js/787.49f8686c.chunk.js.map"
},
"entrypoints": [
- "static/css/main.38044ab5.css",
- "static/js/main.a040a512.js"
+ "static/css/main.e5571b18.css",
+ "static/js/main.6cf9f33e.js"
]
}
\ No newline at end of file
diff --git a/netmiko_client/build/index.html b/netmiko_client/build/index.html
index 946e965..754dce4 100644
--- a/netmiko_client/build/index.html
+++ b/netmiko_client/build/index.html
@@ -1 +1 @@
-