CiscoTool_v1/netmiko_Api/public/filesTest/20230517-AUTO-Session.AUS-2...

263 lines
12 KiB
Plaintext

Faulty:
*may 17 03:51:13.171: %pa-3-pa_init_failed: performance agent failed to initialize (missing data license)
*may 17 03:52:42.139: %sys-4-config_resolve_failure: system config parse from (tftp://255.255.255.255/network-confg) failed
*may 17 03:53:20.207: %sys-4-config_resolve_failure: system config parse from (tftp://255.255.255.255/cisconet.cfg) failed
======================================================================
###show inv
NAME: "CISCO1941W-N/K9", DESCR: "CISCO1941W-N/K9 chassis, Hw Serial#: FGL1638218B, Hw Revision: 1.0"
PID: CISCO1941W-N/K9 , VID: V05 , SN: FGL1638218B
NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 1", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-1MFT-T1/E1 , VID: V01 , SN: FOC12356GME
###show ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Feb-18 09:56 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Router uptime is 4 minutes
System returned to ROM by power-on
System restarted at 05:48:25 UTC Wed May 17 2023
System image file is "flash0:c1900-universalk9-mz.SPA.156-3.M4.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO1941W-N/K9 (revision 1.0) with 2555840K/65536K bytes of memory.
Processor board ID FGL1638218B
3 Gigabit Ethernet interfaces
2 terminal lines
1 Channelized (E1 or T1)/PRI port
1 Virtual Private Network (VPN) Module
1 cisco Embedded AP (s)
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*1 CISCO1941W-N/K9 FGL1638218B
Suite License Information for Module:'c1900'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None None None
securityk9
datak9
Technology Package License Information for Module:'c1900'
------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data None None None
Configuration register is 0x2102
###show diag
Slot 0:
C1941 Mother board 2GE, integrated VPN and 2W Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time 00:03:49 ago
EEPROM contents at hardware discovery:
PCB Serial Number : FOC163536A4
Hardware Revision : 1.0
Part Number : 73-11832-09
Top Assy. Part Number : 800-32019-05
Board Revision : A0
Deviation Number : 0
Fab Version : 03
Product (FRU) Number : CISCO1941W-N/K9
Version Identifier : V05
CLEI Code : CMMHH10ARA
Processor type : C8
Chassis Serial Number : FGL1638218B
Chassis MAC Address : fc99.47ad.e420
MAC Address block size : 96
Manufacturing Test Data : 00 00 00 00 00 00 00 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 46 4F 43 31 36 33 35 33 36 41 34 40
0x10: 06 19 41 01 00 82 49 2E 38 09 C0 46 03 20 00 7D
0x20: 13 05 42 41 30 88 00 00 00 00 02 03 CB 8F 43 49
0x30: 53 43 4F 31 39 34 31 57 2D 4E 2F 4B 39 89 56 30
0x40: 35 20 D9 04 40 C1 CB C2 C6 8A 43 4D 4D 48 48 31
0x50: 30 41 52 41 09 C8 C2 8B 46 47 4C 31 36 33 38 32
0x60: 31 38 42 C3 06 FC 99 47 AD E4 20 43 00 60 C4 08
0x70: 00 00 00 00 00 00 00 00 F3 00 65 40 00 91 41 00
0x80: 87 42 00 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B
0x90: B8 20 93 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B
0xA0: 58 21 B0 1F 40 21 AB 23 28 21 79 27 10 21 78 41
0xB0: 00 EB 42 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40
0xC0: 0B B8 20 6C 0F A0 21 34 13 88 21 34 17 70 21 98
0xD0: 1B 58 21 98 1F 40 21 98 23 28 21 34 27 10 21 34
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 1:
VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1
Hardware Revision : 0.0
Top Assy. Part Number : 800-22628-05
Board Revision : B0
Deviation Number : 0
Fab Version : 04
PCB Serial Number : FOC12356GME
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : VWIC2-1MFT-T1/E1
Version Identifier : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 FD 41 00 00 C0 46 03 20 00 58 64 05
0x10: 42 42 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31
0x20: 32 33 35 36 47 4D 45 03 00 81 00 00 00 00 04 00
0x30: CB 90 56 57 49 43 32 2D 31 4D 46 54 2D 54 31 2F
0x40: 45 31 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Embedded Service Engine 0/0 :
Total platform memory : 2621440K bytes
Total 2nd core memory : 0K bytes
Start of physical address for 2nd core : 0x80000000
Virtual address start of 2nd core memory : 0x0 - 0x0
2nd core configured disabled
L2 cache ways for 2nd core : 0
###show post
^
% Invalid input detected at '^' marker.
###show env all
SYSTEM POWER SUPPLY STATUS
==========================
Power Supply Type: AC-POE
Power Supply 12V Output Status: Normal
Power Supply POE -48V Voltage Status: Normal
SYSTEM FAN STATUS
=================
System Fan OK, Low speed setting
SYSTEM TEMPERATURE STATUS
=========================
Intake Left temperature: 18 Celsius, Normal
Intake Right(Bezel) temperature: 16 Celsius, Normal
Exhaust Fan temperature: 24 Celsius, Normal
Intake Right temperature: 15 Celsius, Normal
CPU temperature: 55 Celsius, Normal
REAL TIME CLOCK BATTERY STATUS
==============================
Battery OK (checked at power up)
SYSTEM POWER
===============
Motherboard Components Power consumption = 40.7 W
Total System Power consumption is: 40.7 W
Environmental information last updated 00:00:05 ago
###show logging
Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 33 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 33 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 34 message lines logged
Logging Source-Interface: VRF Name:
Log Buffer (8192 bytes):
*Jan 2 00:00:02.219: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jan 2 00:00:02.535: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
*Jan 2 00:00:02.735: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = securityk9 and License = securityk9
*May 17 03:50:57.663: c3600_scp_set_dstaddr2_idb(185)add = 80 name is Embedded-Service-Engine0/0
*May 17 03:51:08.723: c3600_scp_set_dstaddr2_idb(185)add = 0 name is Wlan-GigabitEthernet0/0
*May 17 03:51:13.171: %PA-3-PA_INIT_FAILED: Performance Agent failed to initialize (Missing Data License)
*May 17 03:51:13.199: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*May 17 03:51:13.203: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*May 17 03:51:18.087: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*May 17 03:51:18.087: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
*May 17 03:51:18.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface wlan-ap0, changed state to up
*May 17 03:51:18.955: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*May 17 03:51:19.187: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*May 17 03:51:19.187: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*May 17 03:52:05.127: AUTOINSTALL: GigabitEthernet0/0 is assigned 192.168.7.4
*May 17 03:52:18.739: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*May 17 03:52:18.739: %LINK-5-CHANGED: Interface wlan-ap0, changed state to administratively down
*May 17 03:52:18.739: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
*May 17 03:52:19.739: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*May 17 03:52:19.739: %LINEPROTO-5-UPDOWN: Line protocol on Interface wlan-ap0, changed state to down
*May 17 03:52:42.139: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
*May 17 03:53:20.207: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
*May 17 03:53:24.535: %LINK-3-UPDOWN: Interface Wlan-GigabitEthernet0/0, changed state to up
*May 17 03:53:25.491: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.6(3)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Feb-18 09:56 by prod_rel_team
*May 17 03:53:26.159: %LINEPROTO-5-UPDOWN: Line protocol on Interface Wlan-GigabitEthernet0/0, changed state to up
*May 17 03:53:26.175: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 17 03:53:26.175: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*May 17 03:53:26.175: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 17 03:53:26.175: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*May 17 03:53:26.799: %IP-5-WEBINST_KILL: Terminating DNS process
May 17 05:51:34.458: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
May 17 05:52:24.154: %PNP-6-HTTP_CONNECTING: PnP Discovery trying to connect to PnP server https://devicehelper.cisco.com/pnp/HELLO
May 17 05:52:25.034: %PNP-6-HTTP_CONNECTED: PnP Discovery connected to PnP server https://devicehelper.cisco.com/pnp/HELLO