CiscoTool_v1/netmiko_Api/public/filesTest/20230518-AUTO-Session.AUS-2...

240 lines
12 KiB
Plaintext

###show inv
NAME: "Chassis", DESCR: "Cisco ISR4431 Chassis"
PID: ISR4431/K9 , VID: V01, SN: FGL211510TM
NAME: "Power Supply Module 0", DESCR: "250W AC Power Supply for Cisco ISR4430"
PID: PWR-4430-AC , VID: V01, SN: LIT21122MNE
NAME: "Fan Tray", DESCR: "Cisco ISR4430 Fan Assembly"
PID: ACS-4430-FANASSY , VID: , SN:
NAME: "module 0", DESCR: "Cisco ISR4431 Built-In NIM controller"
PID: ISR4431/K9 , VID: , SN:
NAME: "NIM subslot 0/2", DESCR: "NIM SSD Module"
PID: NIM-SSD , VID: V01, SN: FOC21117F58
NAME: "subslot 0/2 disk0", DESCR: "harddisk"
PID: TOSHIBA THNSNJ200PCSZ , VID: JZET6102, SN: 17CS100KTMBW
NAME: "NIM subslot 0/0", DESCR: "Front Panel 4 ports Gigabitethernet Module"
PID: ISR4431-X-4x1GE , VID: V01, SN: JAB092709EL
NAME: "module R0", DESCR: "Cisco ISR4431 Route Processor"
PID: ISR4431/K9 , VID: V01, SN: FOC20110YU1
NAME: "module F0", DESCR: "Cisco ISR4431 Forwarding Processor"
PID: ISR4431/K9 , VID: , SN:
###show ver
Cisco IOS XE Software, Version 03.16.04b.S - Extended Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 17-Oct-16 20:23 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 1 hour, 11 minutes
Uptime for this control processor is 1 hour, 12 minutes
System returned to ROM by reload
System image file is "bootflash:isr4400-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 FoundationSuiteK9 Permanent FoundationSuiteK9
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None appxk9
uck9 None None None
securityk9 None None securityk9
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4431/K9 (1RU) processor with 7792789K/6147K bytes of memory.
Processor board ID FGL211510TM
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
14659583K bytes of flash memory at bootflash:.
20971520K bytes of SATA hard disk at harddisk:.
Configuration register is 0x2102
###show diag
% Incomplete command.
###show post
^
% Invalid input detected at '^' marker.
###show env all
Sensor List: Environmental Monitoring
Sensor Location State Reading
Temp: Temp 1 P0 Normal 33 Celsius
Temp: Temp 2 P0 Normal 31 Celsius
Temp: Temp 3 P0 Normal 47 Celsius
V: PEM Out P0 Normal 12000 mV
I: PEM In P0 Normal 1 A
I: PEM Out P0 Normal 6 A
P: In pwr P0 Normal 69 Watts
P: Out pwr P0 Normal 61 Watts
RPM: fan0 P0 Normal 4320 RPM
RPM: fan0 P2 Normal 9346 RPM
RPM: fan1 P2 Normal 9580 RPM
RPM: fan2 P2 Normal 9330 RPM
P: pwr P2 Normal 4 Watts
Temp: Inlet 1 R0 Normal 21 Celsius
Temp: Inlet 2 R0 Normal 29 Celsius
Temp: Outlet 1 R0 Normal 26 Celsius
Temp: Outlet 2 R0 Normal 27 Celsius
Temp: core-A R0 Normal 40 Celsius
Temp: core-B R0 Normal 39 Celsius
Temp: core-C R0 Normal 36 Celsius
V: 12v R0 Normal 11975 mV
V: 5v R0 Normal 5118 mV
V: 3.3v R0 Normal 3352 mV
V: 3.0v R0 Normal 2998 mV
V: 2.5v R0 Normal 2509 mV
V: 1.05v R0 Normal 1052 mV
V: 1.8v R0 Normal 1806 mV
V: 1.2v R0 Normal 1218 mV
V: Vcore-C R0 Normal 1157 mV
V: 1.1v R0 Normal 1102 mV
V: 1.0v R0 Normal 1028 mV
V: 1.8v-A R0 Normal 1795 mV
V: 1.5v-A R0 Normal 1513 mV
V: 1.5v-C1 R0 Normal 1529 mV
V: 1.5v-B R0 Normal 1521 mV
V: Vcore-A R0 Normal 996 mV
V: 1.5v-C2 R0 Normal 1511 mV
V: Vcore-B1 R0 Normal 867 mV
V: Vcore-B2 R0 Normal 915 mV
V: 0.75v-B R0 Normal 754 mV
V: 0.75v-C R0 Normal 764 mV
I: 12v R0 Normal 5 A
P: pwr R0 Normal 50 Watts
P: pwr: Pwr 0/2 Normal 3 Watts
###show logging
Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 64 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 64 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 66 message lines logged
Logging Source-Interface: VRF Name:
Log Buffer (4096 bytes):
A removed from subslot 0/2, interfaces disabled
*May 18 00:57:28.915: %SPA_OIR-6-OFFLINECARD: SPA (ISR4431-X-4x1GE) offline in subslot 0/0
*May 18 00:57:28.916: %SPA_OIR-6-OFFLINECARD: SPA (NIM-SSD) offline in subslot 0/2
*May 18 00:57:28.919: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*May 18 00:57:28.919: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*May 18 00:57:28.958: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*May 18 00:57:28.959: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*May 18 00:57:28.967: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/0
*May 18 00:57:28.970: %IOSXE_OIR-6-INSSPA: SPA inserted in subslot 0/2
*May 18 00:57:28.995: %SPA-3-ENVMON_NOT_MONITORED:iomd: Environmental monitoring is not enabled for ISR4431-X-4x1GE[0/0]
*May 18 00:57:33.683: %IOSXE-4-PLATFORM:kernel: pci 0000:4f:00.0: no hotplug settings from platform
*May 18 00:57:33.989: %IOSXE-5-PLATFORM:kernel: scsi 7:0:0:0: Direct-Access ATA TOSHIBA THNSNJ20 JZET PQ: 0 ANSI: 5
*May 18 00:57:33.990: %IOSXE-5-PLATFORM:kernel: sd 7:0:0:0: Attached scsi generic sg1 type 0
*May 18 00:57:33.990: %IOSXE-5-PLATFORM:kernel: sd 7:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
*May 18 00:57:33.991: %IOSXE-5-PLATFORM:kernel: sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
*May 18 00:57:33.992: %IOSXE-5-PLATFORM:kernel: sd 7:0:0:0: [sdb] Attached SCSI disk
*May 18 00:57:37.045: %SPA_OIR-6-ONLINECARD: SPA (ISR4431-X-4x1GE) online in subslot 0/0
*May 18 00:57:38.990: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to down
*May 18 00:57:39.038: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/1, changed state to down
*May 18 00:57:39.040: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/2, changed state to down
*May 18 00:57:39.042: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/3, changed state to down
*May 18 00:57:44.187: %IOSXE-6-PLATFORM:disk-module: forcing config of LVM in non-raid-enable case
*May 18 00:57:44.310: %IOSXE-6-PLATFORM:disk-module: check_lvm_mismatch: disk_count=1, pv_count=1, db_pv_uuid=PVUUID:6xeEfe-Xymu-Ap4Y-1tXJ-244d-onoR-85Mteo uuid_count=1
*May 18 00:57:44.327: %IOSXE-6-PLATFORM:disk-module: no mismatch found
*May 18 00:57:44.446: %IOSXE-6-PLATFORM:disk-module: enabling vg and lvm
*May 18 00:57:44.496: %IOSXE-6-PLATFORM:disk-module: fsck /dev/lvm_raid/lvm0
*May 18 00:57:44.505: %IOSXE-6-PLATFORM:disk-module: mounting lvm to /vol/harddisk
*May 18 00:57:44.509: %IOSXE-6-PLATFORM:disk-module: Generating gdev-info file - non raid case
*May 18 00:57:44.517: %IOSXE-6-PLATFORM:disk-module: generating /tmp/udev/etc/udev/harddisk/udev-info file
*May 18 00:57:44.632: %IOSXE-5-PLATFORM:logger: INFO: Starting SMART deamon
*May 18 00:57:45.609: new extended attributes received from iomd(slot 0 bay 2 board 0)
*May 18 00:57:46.111: %SPA_OIR-6-ONLINECARD: SPA (NIM-SSD) online in subslot 0/2
*May 18 00:58:04.500: %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed state to administratively down
*May 18 00:58:04.501: %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed state to administratively down
*May 18 00:58:04.502: %LINK-5-CHANGED: Interface GigabitEthernet0/0/2, changed state to administratively down
*May 18 00:58:04.502: %LINK-5-CHANGED: Interface GigabitEthernet0/0/3, changed state to administratively down
*May 18 00:58:04.502: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*May 18 00:58:04.838: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
*May 18 00:58:08.083: %SYS-5-RESTART: System restarted --
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 17-Oct-16 20:23 by mcpre
*May 18 00:58:08.261: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 18 00:58:08.261: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*May 18 00:58:28.266: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 18 00:58:28.266: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF