CiscoTool_v1/netmiko_Api/public/filesTest/20230720-AUTO-Session.AU-de...

118 lines
3.3 KiB
Plaintext

Load IOS failed+
=======================================*****Load IOS failed******
clear line 22
[confirm]
[OK]
AU-dev#connect p5
Trying p5 (1.1.1.1, 2022)... Open
rommon 1 > flash_init
monitor: command "flash_init" not found
rommon 2 >
rommon 2 > set
PS1=rommon ! >
RTC_STAT=0
TFTP_RETRY_COUNT=20
WARM_REBOOT=FALSE
LICENSE_BOOT_LEVEL=datak9,datak9:c2900;
DEFAULT_GATEWAY=172.16.5.2
IP_ADDRESS=172.16.19.105
IP_SUBNET_MASK=255.255.0.0
TFTP_SERVER=192.168.5.7
TFTP_FILE=i/c2900-universalk9-mz.SPA.152-4.M4.bin
?=0
RELOAD_TYPE=1
RANDOM_NUM=1295944857
BSI=0
RET_2_RTS=06:59:41 UTC Thu Jul 20 2023
RET_2_RCALTS=1689836381
rommon 3 >
rommon 3 > showmon
Last Reset Reason: System Reset
ReadOnly ROMMON version is:
System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2011 by cisco Systems, Inc.
No upgrade ROMMON version present
ReadOnly ROMMON currently running
ReadOnly ROMMON is selected for next boot
rommon 4 > show info
monitor: command "show" not found
rommon 5 > confreg
Configuration Summary
(Virtual Configuration Register: 0x2142)
enabled are:
load rom after netboot fails
ignore system config info
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-CISCO2911/K9
do you wish to change the configuration? y/n [n]: n
rommon 6 >
rommon 6 > flash_init
monitor: command "flash_init" not found
rommon 7 > format flash:
monitor: command "format" not found
rommon 8 > y
monitor: command "y" not found
rommon 9 > DEFAULT_GATEWAY=172.16.5.2
rommon 10 > IP_ADDRESS=172.16.19.105
rommon 11 > IP_SUBNET_MASK=255.255.0.0
rommon 12 > TFTP_SERVER=192.168.5.7
rommon 13 > TFTP_FILE=i/c2900-universalk9-mz.SPA.152-4.M4.bin
rommon 14 > tftpdnld
IP_ADDRESS: 172.16.19.105
IP_SUBNET_MASK: 255.255.0.0
DEFAULT_GATEWAY: 172.16.5.2
TFTP_SERVER: 192.168.5.7
TFTP_FILE: i/c2900-universalk9-mz.SPA.152-4.M4.bin
TFTP_MACADDR: e0:2f:6d:31:80:80
TFTP_DESTINATION: flash0:
GE_PORT: Ge0/0
TFTP_MEDIA_TYPE: Copper
TFTP_VERBOSE: Progress
TFTP_RETRY_COUNT: 20
TFTP_TIMEOUT: 7200
TFTP_CHECKSUM: Yes
GE_SPEED_MODE: Auto Detect
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash will be lost!
Do you wish to continue? y/n: [n]: y
.....
Receiving i/c2900-universalk9-mz.SPA.152-4.M4.bin from 192.168.5.7 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
File reception completed.
IOS Image Load Test
___________________
Digitally Signed Release Software
Validating checksum.
Copying file i/c2900-universalk9-mz.SPA.152-4.M4.bin to flash0:.
program load complete, entry point: 0x80803000, size: 0x1b340
Format: All system sectors written. OK...
Format: Total sectors in formatted partition: 501728
Format: Total bytes in formatted partition: %llu
Format: Operation completed successfully.
program load complete, entry point: 0x80803000, size: 0x1b340