275 lines
12 KiB
Plaintext
275 lines
12 KiB
Plaintext
PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
|
|
RAM: 0.46G
|
|
Flash: 0.24G
|
|
=================================================================
|
|
Faulty:
|
|
internal power supply input status and 12v output status: fail
|
|
|
|
internal power supply poe -48v voltage status: fail
|
|
|
|
======================================================================
|
|
|
|
Router####show inv
|
|
NAME: "CISCO2911/K9", DESCR: "CISCO2911/K9 chassis, Hw Serial#: FGL174510ZN, Hw Revision: 1.0"
|
|
PID: CISCO2911/K9 , VID: V07 , SN: FGL174510ZN
|
|
|
|
NAME: "C2911 AC-POE Power Supply", DESCR: "C2911 AC-POE Power Supply"
|
|
PID: PWR-2911-POE , VID: V02 , SN: ART1904F3KX
|
|
|
|
###show ver
|
|
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
|
|
|
|
Technical Support: http://www.cisco.com/techsupport
|
|
Copyright (c) 1986-2013 by Cisco Systems, Inc.
|
|
Compiled Thu 20-Jun-13 13:06 by prod_rel_team
|
|
|
|
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
|
|
|
|
Router uptime is 1 minute
|
|
System returned to ROM by power-on
|
|
System image file is "flash0:c2900-universalk9-mz.SPA.152-4.M4.bin"
|
|
Last reload type: Normal Reload
|
|
Last reload reason: power-on
|
|
|
|
|
|
|
|
This product contains cryptographic features and is subject to United
|
|
States and local country laws governing import, export, transfer and
|
|
use. Delivery of Cisco cryptographic products does not imply
|
|
third-party authority to import, export, distribute or use encryption.
|
|
Importers, exporters, distributors and users are responsible for
|
|
compliance with U.S. and local country laws. By using this product you
|
|
agree to comply with applicable laws and regulations. If you are unable
|
|
to comply with U.S. and local laws, return this product immediately.
|
|
|
|
A summary of U.S. laws governing Cisco cryptographic products may be found at:
|
|
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
|
|
|
|
If you require further assistance please contact us by sending email to
|
|
export@cisco.com.
|
|
|
|
Cisco CISCO2911/K9 (revision 1.0) with 487424K/36864K bytes of memory.
|
|
Processor board ID FGL174510ZN
|
|
3 Gigabit Ethernet interfaces
|
|
1 terminal line
|
|
1 Virtual Private Network (VPN) Module
|
|
DRAM configuration is 64 bits wide with parity enabled.
|
|
255K bytes of non-volatile configuration memory.
|
|
250880K bytes of ATA System CompactFlash 0 (Read/Write)
|
|
|
|
|
|
License Info:
|
|
|
|
License UDI:
|
|
|
|
-------------------------------------------------
|
|
Device# PID SN
|
|
-------------------------------------------------
|
|
*0 CISCO2911/K9 FGL174510ZN
|
|
|
|
|
|
|
|
Technology Package License Information for Module:'c2900'
|
|
|
|
-----------------------------------------------------------------
|
|
Technology Technology-package Technology-package
|
|
Current Type Next reboot
|
|
------------------------------------------------------------------
|
|
ipbase ipbasek9 Permanent ipbasek9
|
|
security securityk9 Permanent securityk9
|
|
uc uck9 Permanent uck9
|
|
data None None None
|
|
|
|
Configuration register is 0x2142
|
|
###show diag
|
|
Slot 0:
|
|
C2911 Mother board 3GE, integrated VPN and 4W Port adapter, 3 ports
|
|
Port adapter is analyzed
|
|
Port adapter insertion time 00:01:15 ago
|
|
EEPROM contents at hardware discovery:
|
|
PCB Serial Number : FOC17428K3K
|
|
Hardware Revision : 1.0
|
|
Part Number : 73-11833-11
|
|
Top Assy. Part Number : 800-30797-06
|
|
Board Revision : C1
|
|
Deviation Number : 130603
|
|
Fab Version : 03
|
|
Product (FRU) Number : CISCO2911/K9
|
|
|
|
Version Identifier : V07
|
|
CLEI Code : CMMJD00ARA
|
|
Processor type : C1
|
|
Chassis Serial Number : FGL174510ZN
|
|
Chassis MAC Address : 78da.6e42.4a48
|
|
MAC Address block size : 80
|
|
Manufacturing Test Data : 00 00 00 00 00 00 00 00
|
|
EEPROM format version 4
|
|
EEPROM contents (hex):
|
|
0x00: 04 FF C1 8B 46 4F 43 31 37 34 32 38 4B 33 4B 40
|
|
0x10: 06 18 41 01 00 82 49 2E 39 0B C0 46 03 20 00 78
|
|
0x20: 4D 06 42 43 31 88 00 01 FE 2B 02 03 CB 8C 43 49
|
|
0x30: 53 43 4F 32 39 31 31 2F 4B 39 89 56 30 37 20 D9
|
|
0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 4A 44 30 30 41 52
|
|
0x50: 41 09 C1 C2 8B 46 47 4C 31 37 34 35 31 30 5A 4E
|
|
0x60: C3 06 78 DA 6E 42 4A 48 43 00 50 C4 08 00 00 00
|
|
0x70: 00 00 00 00 00 F3 00 03 40 01 25 FF FF FF FF FF
|
|
0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
Internal Power Supply information
|
|
Top Assy. Part Number : 341-0236-04
|
|
Deviation Number : 0
|
|
PCB Serial Number : ART1904F3KX
|
|
|
|
RMA Test History : 00
|
|
RMA Number : 0-0-0-0
|
|
RMA History : 00
|
|
Version Identifier : V02
|
|
Product (FRU) Number : PWR-2911-POE
|
|
CLEI Code : COUPAFRBAB
|
|
Board Revision : A0
|
|
EEPROM format version 4
|
|
EEPROM contents (hex):
|
|
|
|
0x00: 04 FF 40 05 E6 DF 45 01 55 00 EC 04 88 00 00 00
|
|
0x10: 00 C1 8B 41 52 54 31 39 30 34 46 33 4B 58 03 00
|
|
0x20: 81 00 00 00 00 04 00 89 56 30 32 20 CB 8C 50 57
|
|
0x30: 52 2D 32 39 31 31 2D 50 4F 45 C6 8A 43 4F 55 50
|
|
0x40: 41 46 52 42 41 42 F3 00 59 41 01 86 42 00 05 F8
|
|
0x50: 00 50 02 12 17 BA 03 15 19 94 04 17 1B 24 05 19
|
|
0x60: 1C 51 06 1A 1D 1F 07 1B 1D F2 08 1C 1E 9F 09 1C
|
|
0x70: 1F 26 0A 1D 1F 94 0B 1C 1F ED 0C 1C 20 36 0E 1A
|
|
0x80: 20 A9 10 16 20 F9 12 11 21 31 14 0B 21 5D 17 FA
|
|
0x90: 21 8A 1B E4 21 9B 1F C9 21 98 23 A8 21 87 27 82
|
|
0xA0: 21 B1 42 41 30 FF FF FF FF FF FF FF FF FF FF FF
|
|
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
|
|
|
|
|
|
Embedded Service Engine 0/0 :
|
|
Total platform memory : 524288K bytes
|
|
Total 2nd core memory : 0K bytes
|
|
Start of physical address for 2nd core : 0x80000000
|
|
Virtual address start of 2nd core memory : 0x0 - 0x0
|
|
2nd core configured disabled
|
|
L2 cache ways for 2nd core : 0
|
|
###show post
|
|
^
|
|
% Invalid input detected at '^' marker.
|
|
###show env all
|
|
SYSTEM POWER SUPPLY STATUS
|
|
==========================
|
|
Internal Power Supply Type: AC-POE
|
|
Internal Power Supply Input Status and 12V Output Status: Fail
|
|
Internal Power Supply POE -48V Voltage Status: Fail
|
|
|
|
External Redundant Power Supply is absent or powered off
|
|
|
|
SYSTEM FAN STATUS
|
|
=================
|
|
Fan Rotation Alert: Total 2 Fan Low RPM
|
|
Fan 1 OK, Maximum speed setting
|
|
Fan 2 OK, Maximum speed setting
|
|
Fan 3 OK, Maximum speed setting
|
|
Fan 4 Low RPM
|
|
|
|
SYSTEM TEMPERATURE STATUS
|
|
=========================
|
|
Intake Left(Bezel) temperature: 21 Celsius, Normal
|
|
Intake Left temperature: 23 Celsius, Normal
|
|
Exhaust Right(Bezel) temperature: 26 Celsius, Normal
|
|
Exhaust Right temperature: 23 Celsius, Normal
|
|
CPU temperature: 44 Celsius, Normal
|
|
Power Supply Unit temperature: 23 Celsius, Normal
|
|
|
|
REAL TIME CLOCK BATTERY STATUS
|
|
==============================
|
|
Battery OK (checked at power up)
|
|
|
|
SYSTEM POWER
|
|
===============
|
|
Motherboard Components Power consumption = 81.3 W
|
|
Total System Power consumption is: 81.3 W
|
|
|
|
Environmental information last updated 00:00:24 ago
|
|
###show logging
|
|
Syslog logging: enabled (0 messages dropped, 4 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
|
|
|
|
No Active Message Discriminator.
|
|
|
|
|
|
|
|
No Inactive Message Discriminator.
|
|
|
|
|
|
Console logging: level debugging, 28 messages logged, xml disabled,
|
|
filtering disabled
|
|
Monitor logging: level debugging, 0 messages logged, xml disabled,
|
|
filtering disabled
|
|
Buffer logging: level debugging, 28 messages logged, xml disabled,
|
|
filtering disabled
|
|
Exception Logging: size (4096 bytes)
|
|
Count and timestamp logging messages: disabled
|
|
Persistent logging: disabled
|
|
|
|
No active filter modules.
|
|
|
|
Trap logging: level informational, 31 message lines logged
|
|
Logging Source-Interface: VRF Name:
|
|
|
|
Log Buffer (8192 bytes):
|
|
|
|
*Jan 2 00:00:04.943: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9
|
|
*Jan 2 00:00:05.103: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = securityk9 and License = securityk9
|
|
*Jan 2 00:00:05.255: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = uck9 and License = uck9
|
|
*Jan 2 00:00:05.595: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 4 is running at low RPM. Rotation speed is now high for all other fans. Fan Tray replacement is recommended.
|
|
*Jul 26 04:19:00.635: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0
|
|
*Jul 26 04:19:07.063: %PVDM-6-UNSUPPORTED: Codec G.723 is not supported on PVDM3.
|
|
*Jul 26 04:19:18.515: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
|
|
*Jul 26 04:19:18.519: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
|
|
*Jul 26 04:19:19.407: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to up
|
|
*Jul 26 04:19:19.407: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
|
|
*Jul 26 04:19:19.407: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
|
|
*Jul 26 04:19:19.407: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
|
|
*Jul 26 04:19:20.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
|
|
*Jul 26 04:19:20.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
|
|
*Jul 26 04:19:20.539: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
|
|
*Jul 26 04:19:21.359: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
|
|
*Jul 26 04:19:31.039: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
|
|
*Jul 26 04:19:31.039: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
|
|
*Jul 26 04:19:31.039: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
|
|
*Jul 26 04:19:31.039: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
|
|
*Jul 26 04:19:32.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
|
|
*Jul 26 04:19:32.087: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
|
|
*Jul 26 04:19:32.527: %SYS-5-RESTART: System restarted --
|
|
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
|
|
Technical Support: http://www.cisco.com/techsupport
|
|
Copyright (c) 1986-2013 by Cisco Systems, Inc.
|
|
Compiled Thu 20-Jun-13 13:06 by prod_rel_team
|
|
*Jul 26 04:19:32.567: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
|
|
*Jul 26 04:19:33.199: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
|
|
*Jul 26 04:19:33.199: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
|
|
*Jul 26 04:19:33.199: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
|
|
*Jul 26 04:19:33.199: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF###show power
|
|
^
|
|
% Invalid input detected at '^' marker.
|
|
Interface IP-Address OK? Method Status Protocol
|
|
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
|
|
GigabitEthernet0/0 unassigned YES unset administratively down down
|
|
GigabitEthernet0/1 unassigned YES unset administratively down down
|
|
GigabitEthernet0/2 unassigned YES unset administratively down down ^
|
|
% Invalid input detected at '^' marker.
|
|
configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Router(config)#interface range GigabitEthernet0/0-2
|
|
Router(config-if-range)#no shut
|
|
Router(config-if-range)#end
|
|
Router# |