379 lines
20 KiB
Plaintext
379 lines
20 KiB
Plaintext
PID: WS-C3650-48PS-S , VID: V01 , SN: FDO1911E2N9
|
|
RAM: 0.81G
|
|
Flash: 1.53G
|
|
=================================================================
|
|
Faulty:
|
|
*jul 16 23:58:54.065: %iosxe_mgmtvrf-3-afi_attach_fail: management vrf afi ipv6 attach failed
|
|
|
|
======================================================================
|
|
|
|
Switch####show inv
|
|
NAME: "c36xx Stack", DESCR: "c36xx Stack"
|
|
PID: WS-C3650-48PS-S , VID: V01 , SN: FDO1911E2N9
|
|
|
|
NAME: "Switch 1", DESCR: "WS-C3650-48PS-S"
|
|
PID: WS-C3650-48PS-S , VID: V01 , SN: FDO1911E2N9
|
|
|
|
NAME: "StackAdapter1/1", DESCR: "StackAdapter1/1"
|
|
PID: C3650-STACK , VID: V01 , SN: FDO19121LTQ
|
|
|
|
NAME: "StackAdapter1/2", DESCR: "StackAdapter1/2"
|
|
PID: C3650-STACK , VID: V01 , SN: FDO19121LTH
|
|
|
|
NAME: "Switch 1 - Power Supply A", DESCR: "Switch 1 - Power Supply A"
|
|
PID: PWR-C2-640WAC , VID: V01 , SN: DCB1906B43X
|
|
|
|
###show ver
|
|
Cisco IOS XE Software, Version 16.06.05
|
|
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.6.5, RELEASE SOFTWARE (fc3)
|
|
Technical Support: http://www.cisco.com/techsupport
|
|
Copyright (c) 1986-2018 by Cisco Systems, Inc.
|
|
Compiled Mon 10-Dec-18 11:34 by mcpre
|
|
|
|
|
|
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
|
|
All rights reserved. Certain components of Cisco IOS-XE software are
|
|
licensed under the GNU General Public License ("GPL") Version 2.0. The
|
|
software code licensed under GPL Version 2.0 is free software that comes
|
|
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
|
|
GPL code under the terms of GPL Version 2.0. For more details, see the
|
|
documentation or "License Notice" file accompanying the IOS-XE software,
|
|
or the applicable URL provided on the flyer accompanying the IOS-XE
|
|
software.
|
|
|
|
|
|
ROM: IOS-XE ROMMON
|
|
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.66, RELEASE SOFTWARE (P)
|
|
|
|
Switch uptime is 1 hour, 31 minutes
|
|
Uptime for this control processor is 1 hour, 34 minutes
|
|
System returned to ROM by Power Failure or Unknown
|
|
System image file is "flash:packages.conf"
|
|
Last reload reason: Power Failure or Unknown
|
|
|
|
|
|
|
|
This product contains cryptographic features and is subject to United
|
|
States and local country laws governing import, export, transfer and
|
|
use. Delivery of Cisco cryptographic products does not imply
|
|
third-party authority to import, export, distribute or use encryption.
|
|
Importers, exporters, distributors and users are responsible for
|
|
compliance with U.S. and local country laws. By using this product you
|
|
agree to comply with applicable laws and regulations. If you are unable
|
|
to comply with U.S. and local laws, return this product immediately.
|
|
|
|
A summary of U.S. laws governing Cisco cryptographic products may be found at:
|
|
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
|
|
|
|
If you require further assistance please contact us by sending email to
|
|
export@cisco.com.
|
|
|
|
|
|
Technology Package License Information:
|
|
|
|
-----------------------------------------------------------------
|
|
Technology-package Technology-package
|
|
Current Type Next reboot
|
|
------------------------------------------------------------------
|
|
ipbasek9 Permanent ipbasek9
|
|
|
|
cisco WS-C3650-48PS (MIPS) processor (revision D0) with 853097K/6147K bytes of memory.
|
|
Processor board ID FDO1911E2N9
|
|
1 Virtual Ethernet interface
|
|
52 Gigabit Ethernet interfaces
|
|
2048K bytes of non-volatile configuration memory.
|
|
4194304K bytes of physical memory.
|
|
250456K bytes of Crash Files at crashinfo:.
|
|
1609272K bytes of Flash at flash:.
|
|
0K bytes of WebUI ODM Files at webui:.
|
|
|
|
Base Ethernet MAC Address : b0:aa:77:ca:31:00
|
|
Motherboard Assembly Number : 73-15131-05
|
|
Motherboard Serial Number : FDO19111EDN
|
|
Model Revision Number : D0
|
|
Motherboard Revision Number : A0
|
|
Model Number : WS-C3650-48PS
|
|
System Serial Number : FDO1911E2N9
|
|
|
|
|
|
Switch Ports Model SW Version SW Image Mode
|
|
------ ----- ----- ---------- ---------- ----
|
|
* 1 52 WS-C3650-48PS 16.6.5 CAT3K_CAA-UNIVERSALK9 INSTALL
|
|
|
|
|
|
Configuration register is 0x142 (will be 0x102 at next reload)
|
|
###show post
|
|
Stored system POST messages:
|
|
|
|
Switch 1
|
|
---------
|
|
|
|
POST: MBIST Tests : Begin
|
|
POST: MBIST Tests : End, Status Passed
|
|
|
|
POST: CRYPTO Tests : Begin
|
|
POST: CRYPTO Tests : End, Status Passed
|
|
|
|
POST: PHY Loopback: loopback Test : Begin
|
|
POST: PHY Loopback: loopback Test : End, Status Passed
|
|
|
|
POST: Inline Power Controller Tests : Begin
|
|
POST: Inline Power Controller Tests : End, Status Passed
|
|
|
|
POST: Thermal, Temperature Tests : Begin
|
|
POST: Thermal, Temperature Tests : End, Status Passed
|
|
|
|
POST: Thermal, Fan Tests : Begin
|
|
POST: Thermal, Fan Tests : End, Status Passed
|
|
|
|
POST: SIF Tests : Begin
|
|
POST: SIF Tests : End, Status Passed
|
|
|
|
###show logging
|
|
Syslog logging: enabled (0 messages dropped, 1 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
|
|
|
|
No Active Message Discriminator.
|
|
|
|
|
|
|
|
No Inactive Message Discriminator.
|
|
|
|
|
|
Console logging: level debugging, 33 messages logged, xml disabled,
|
|
filtering disabled
|
|
Monitor logging: level debugging, 0 messages logged, xml disabled,
|
|
filtering disabled
|
|
Buffer logging: level debugging, 33 messages logged, xml disabled,
|
|
filtering disabled
|
|
Exception Logging: size (4096 bytes)
|
|
Count and timestamp logging messages: disabled
|
|
File logging: disabled
|
|
Persistent logging: disabled
|
|
|
|
No active filter modules.
|
|
|
|
Trap logging: level informational, 34 message lines logged
|
|
Logging Source-Interface: VRF Name:
|
|
|
|
Log Buffer (4096 bytes):
|
|
|
|
*Jul 16 23:58:29.068: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
|
|
*Jul 16 23:58:36.845: dev_pluggable_optics_selftest attribute table internally inconsistent @ 0x1D4
|
|
|
|
*Jul 16 23:58:47.207: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
|
|
*Jul 16 23:58:48.357: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up
|
|
*Jul 16 23:58:48.361: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up
|
|
*Jul 16 23:58:48.363: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
|
|
*Jul 16 23:58:48.363: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up
|
|
*Jul 16 23:58:48.482: WCM-PKI-SHIM: buffer allocation failed for SUDI support check
|
|
*Jul 16 23:58:48.482: PKI/SSL unable to send Sudi support to WCM
|
|
*Jul 16 23:58:48.792: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is nocable
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is nocable
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
|
|
*Jul 16 23:58:33.751: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
|
|
*Jul 16 23:58:49.409: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up
|
|
*Jul 16 23:58:49.409: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1, changed state to up
|
|
*Jul 16 23:58:49.409: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
|
|
*Jul 16 23:58:49.410: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2, changed state to up
|
|
*Jul 16 23:58:51.826: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
|
|
*Jul 16 23:58:53.143: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
|
|
*Jul 16 23:58:53.204: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
|
|
*Jul 16 23:58:54.065: %IOSXE_MGMTVRF-3-AFI_ATTACH_FAIL: Management VRF AFI ipv6 attach failed
|
|
*Jul 16 23:58:54.160: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
|
|
*Jul 16 23:58:55.035: %SYS-5-RESTART: System restarted --
|
|
Cisco IOS Software [Everest], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.6.5, RELEASE SOFTWARE (fc3)
|
|
Technical Support: http://www.cisco.com/techsupport
|
|
Copyright (c) 1986-2018 by Cisco Systems, Inc.
|
|
Compiled Mon 10-Dec-18 11:34 by mcpre
|
|
*Jul 16 23:58:57.028: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
|
|
*Jul 16 23:59:00.524: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)
|
|
*Jul 17 00:18:56.531: %SYS-5-CONFIG_I: Configured from console by console
|
|
*Jul 17 00:18:57.153: %SYS-5-CONFIG_I: Configured from console by console
|
|
*Jul 17 00:18:57.691: %SYS-5-CONFIG_I: Configured from console by console
|
|
*Jul 17 00:18:58.339: %SYS-5-CONFIG_I: Configured from console by console###show env all
|
|
Switch 1 FAN 1 is OK
|
|
Switch 1 FAN 2 is OK
|
|
Switch 1 FAN 3 is OK
|
|
FAN PS-1 is OK
|
|
FAN PS-2 is NOT PRESENT
|
|
Switch 1: SYSTEM TEMPERATURE is OK
|
|
Inlet Temperature Value: 24 Degree Celsius
|
|
|
|
Temperature State: GREEN
|
|
Yellow Threshold : 46 Degree Celsius
|
|
Red Threshold : 56 Degree Celsius
|
|
|
|
ASIC Temperature Value: 50 Degree Celsius
|
|
Temperature State: GREEN
|
|
Yellow Threshold : 105 Degree Celsius
|
|
Red Threshold : 125 Degree Celsius
|
|
SW PID Serial# Status Sys Pwr PoE Pwr Watts
|
|
-- ------------------ ---------- --------------- ------- ------- -----
|
|
1A PWR-C2-640WAC DCB1906B43X OK Good Good 640
|
|
1B Not Present
|
|
|
|
SW Status RPS Name RPS Serial# RPS Port#
|
|
-- ------------- ---------------- ----------- ---------
|
|
Any interface listed with OK? value "NO" does not have a valid configuration
|
|
|
|
Interface IP-Address OK? Method Status Protocol
|
|
Vlan1 unassigned YES unset up down
|
|
GigabitEthernet0/0 unassigned NO unset up up
|
|
GigabitEthernet1/0/1 unassigned YES unset down down
|
|
GigabitEthernet1/0/2 unassigned YES unset down down
|
|
GigabitEthernet1/0/3 unassigned YES unset down down
|
|
GigabitEthernet1/0/4 unassigned YES unset down down
|
|
GigabitEthernet1/0/5 unassigned YES unset down down
|
|
GigabitEthernet1/0/6 unassigned YES unset down down
|
|
GigabitEthernet1/0/7 unassigned YES unset down down
|
|
GigabitEthernet1/0/8 unassigned YES unset down down
|
|
GigabitEthernet1/0/9 unassigned YES unset down down
|
|
GigabitEthernet1/0/10 unassigned YES unset down down
|
|
GigabitEthernet1/0/11 unassigned YES unset down down
|
|
GigabitEthernet1/0/12 unassigned YES unset down down
|
|
GigabitEthernet1/0/13 unassigned YES unset down down
|
|
GigabitEthernet1/0/14 unassigned YES unset down down
|
|
GigabitEthernet1/0/15 unassigned YES unset down down
|
|
GigabitEthernet1/0/16 unassigned YES unset down down
|
|
GigabitEthernet1/0/17 unassigned YES unset down down
|
|
GigabitEthernet1/0/18 unassigned YES unset down down
|
|
GigabitEthernet1/0/19 unassigned YES unset down down
|
|
GigabitEthernet1/0/20 unassigned YES unset down down
|
|
GigabitEthernet1/0/21 unassigned YES unset down down
|
|
GigabitEthernet1/0/22 unassigned YES unset down down
|
|
GigabitEthernet1/0/23 unassigned YES unset down down
|
|
GigabitEthernet1/0/24 unassigned YES unset down down
|
|
GigabitEthernet1/0/25 unassigned YES unset down down
|
|
|
|
GigabitEthernet1/0/26 unassigned YES unset down down
|
|
GigabitEthernet1/0/27 unassigned YES unset down down
|
|
GigabitEthernet1/0/28 unassigned YES unset down down
|
|
GigabitEthernet1/0/29 unassigned YES unset down down
|
|
GigabitEthernet1/0/30 unassigned YES unset down down
|
|
GigabitEthernet1/0/31 unassigned YES unset down down
|
|
GigabitEthernet1/0/32 unassigned YES unset down down
|
|
GigabitEthernet1/0/33 unassigned YES unset down down
|
|
GigabitEthernet1/0/34 unassigned YES unset down down
|
|
GigabitEthernet1/0/35 unassigned YES unset down down
|
|
GigabitEthernet1/0/36 unassigned YES unset down down
|
|
GigabitEthernet1/0/37 unassigned YES unset down down
|
|
GigabitEthernet1/0/38 unassigned YES unset down down
|
|
GigabitEthernet1/0/39 unassigned YES unset down down
|
|
GigabitEthernet1/0/40 unassigned YES unset down down
|
|
GigabitEthernet1/0/41 unassigned YES unset down down
|
|
GigabitEthernet1/0/42 unassigned YES unset down down
|
|
GigabitEthernet1/0/43 unassigned YES unset down down
|
|
GigabitEthernet1/0/44 unassigned YES unset down down
|
|
GigabitEthernet1/0/45 unassigned YES unset down down
|
|
GigabitEthernet1/0/46 unassigned YES unset down down
|
|
GigabitEthernet1/0/47 unassigned YES unset down down
|
|
GigabitEthernet1/0/48 unassigned YES unset down down
|
|
GigabitEthernet1/1/1 unassigned YES unset down down
|
|
GigabitEthernet1/1/2 unassigned YES unset down down
|
|
GigabitEthernet1/1/3 unassigned YES unset down down
|
|
GigabitEthernet1/1/4 unassigned YES unset down down configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface GigabitEthernet0/0
|
|
Switch(config-if)#no shut
|
|
Switch(config-if)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface range GigabitEthernet1/0/1-48
|
|
Switch(config-if-range)#no shut
|
|
Switch(config-if-range)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface range GigabitEthernet1/1/1-4
|
|
Switch(config-if-range)#no shut
|
|
Switch(config-if-range)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface Vlan1
|
|
Switch(config-if)#no shut
|
|
Switch(config-if)#end
|
|
Switch#
|
|
Finish
|
|
Any interface listed with OK? value "NO" does not have a valid configuration
|
|
|
|
Interface IP-Address OK? Method Status Protocol
|
|
Vlan1 unassigned YES unset up down
|
|
GigabitEthernet0/0 unassigned NO unset up up
|
|
GigabitEthernet1/0/1 unassigned YES unset down down
|
|
GigabitEthernet1/0/2 unassigned YES unset down down
|
|
GigabitEthernet1/0/3 unassigned YES unset down down
|
|
GigabitEthernet1/0/4 unassigned YES unset down down
|
|
GigabitEthernet1/0/5 unassigned YES unset down down
|
|
GigabitEthernet1/0/6 unassigned YES unset down down
|
|
GigabitEthernet1/0/7 unassigned YES unset down down
|
|
GigabitEthernet1/0/8 unassigned YES unset down down
|
|
GigabitEthernet1/0/9 unassigned YES unset down down
|
|
GigabitEthernet1/0/10 unassigned YES unset down down
|
|
GigabitEthernet1/0/11 unassigned YES unset down down
|
|
GigabitEthernet1/0/12 unassigned YES unset down down
|
|
GigabitEthernet1/0/13 unassigned YES unset down down
|
|
GigabitEthernet1/0/14 unassigned YES unset down down
|
|
GigabitEthernet1/0/15 unassigned YES unset down down
|
|
GigabitEthernet1/0/16 unassigned YES unset down down
|
|
GigabitEthernet1/0/17 unassigned YES unset down down
|
|
GigabitEthernet1/0/18 unassigned YES unset down down
|
|
GigabitEthernet1/0/19 unassigned YES unset down down
|
|
GigabitEthernet1/0/20 unassigned YES unset down down
|
|
GigabitEthernet1/0/21 unassigned YES unset down down
|
|
GigabitEthernet1/0/22 unassigned YES unset down down
|
|
GigabitEthernet1/0/23 unassigned YES unset down down
|
|
GigabitEthernet1/0/24 unassigned YES unset down down
|
|
GigabitEthernet1/0/25 unassigned YES unset down down
|
|
|
|
GigabitEthernet1/0/26 unassigned YES unset down down
|
|
GigabitEthernet1/0/27 unassigned YES unset down down
|
|
GigabitEthernet1/0/28 unassigned YES unset down down
|
|
GigabitEthernet1/0/29 unassigned YES unset down down
|
|
GigabitEthernet1/0/30 unassigned YES unset down down
|
|
GigabitEthernet1/0/31 unassigned YES unset down down
|
|
GigabitEthernet1/0/32 unassigned YES unset down down
|
|
GigabitEthernet1/0/33 unassigned YES unset down down
|
|
GigabitEthernet1/0/34 unassigned YES unset down down
|
|
GigabitEthernet1/0/35 unassigned YES unset down down
|
|
GigabitEthernet1/0/36 unassigned YES unset down down
|
|
GigabitEthernet1/0/37 unassigned YES unset down down
|
|
GigabitEthernet1/0/38 unassigned YES unset down down
|
|
GigabitEthernet1/0/39 unassigned YES unset down down
|
|
GigabitEthernet1/0/40 unassigned YES unset down down
|
|
GigabitEthernet1/0/41 unassigned YES unset down down
|
|
GigabitEthernet1/0/42 unassigned YES unset down down
|
|
GigabitEthernet1/0/43 unassigned YES unset down down
|
|
GigabitEthernet1/0/44 unassigned YES unset down down
|
|
GigabitEthernet1/0/45 unassigned YES unset down down
|
|
GigabitEthernet1/0/46 unassigned YES unset down down
|
|
GigabitEthernet1/0/47 unassigned YES unset down down
|
|
GigabitEthernet1/0/48 unassigned YES unset down down
|
|
GigabitEthernet1/1/1 unassigned YES unset down down
|
|
GigabitEthernet1/1/2 unassigned YES unset down down
|
|
GigabitEthernet1/1/3 unassigned YES unset down down
|
|
GigabitEthernet1/1/4 unassigned YES unset down down configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface GigabitEthernet0/0
|
|
Switch(config-if)#no shut
|
|
Switch(config-if)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface range GigabitEthernet1/0/1-48
|
|
Switch(config-if-range)#no shut
|
|
Switch(config-if-range)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface range GigabitEthernet1/1/1-4
|
|
Switch(config-if-range)#no shut
|
|
Switch(config-if-range)#end
|
|
Switch#configure terminal
|
|
Enter configuration commands, one per line. End with CNTL/Z.
|
|
Switch(config)#interface Vlan1
|
|
Switch(config-if)#no shut
|
|
Switch(config-if)#end
|
|
Switch#
|
|
Finish
|